LIGHT PASTER GYPSUM

High Quality Caulking

T-800   轻质石膏

产品说明：

本产品是一种以石膏为主要原材料,适配憎水型轻质骨料和进口添加剂等原材料配制成的高性能墙体找平材料,可广泛取代水泥砂浆找平,用于室内干燥区域的建筑内墙和楼板的抹灰找平,特别适用于平整度误差较大的墙面。产品已通过中国环境标志产品认证,是绿色环保产品。

This product is a high-performance wall leveling materlal, which is made of gypsum as the main raw material and other raw materlals such go hydrophobic lightweight aggregates and other lmported additives. It can widely,eplace cement mortar screed, and it is used for leveling he wall and floor, which are in the indoor dry area. Moreover, it plasters and lovels the walls and floors,which is particularly suitable for walls with lerge non-filatness problems.The produpt has passed China Environmental Labeling Product Certrication and is a green product.

产品特点：

具有一定的隔音、保温、隔热性能,更节能、更环保;

可适当调节室内空气温湿度，居住更舒适；

替代传统水泥饰面抹灰，手抹、机喷均可，施工简单、灵活、高效；

施工性能好,和易性好,施工更轻松；

早强、快硬、不空鼓、不开裂;

—次性施工厚度可达3-5cm,省时更省力。

It has certain sound insulation,the performance of heat preservation and insulation. It is more cnergy-salving. more environmental protection.

Applying thec pvoduct can properly adjust the indoor air temperature and humidity, and live with more comfortably.

Replace traditional cement plastering: hand plastering/machine spraying:more simple,flexible,and efficient construction.

Good construction performance and workability and to make construction easier.

Early strength. fast hardness, not empty hollow, not cracking.

The thickness of one-time construction can reach 3-5cm, saving time and effort.

适用范围：

用于室内干燥区域的建筑内墙抹灰找平，特别适用于平整度误差较大的墙面。

This product can apply in the dry area of indoor walls, which is particularly suitable for wals with large non-llatness problems.

施工工艺：

基层处理:铲除疏松部分，做到基层面坚实、无浮灰和污物，用墙固进行界面处理，待干燥后即可批刮本品。墙体表面含水率应低于5%。

搅拌本品:直接加水搅拌，粉水比，重要比1:0.65-0.7；稠度根据一次性找平厚度适当微量调整，以最佳施工为宜。

批刮本品:每次批刮本品厚度最低不能低于2mm，最高一次性不能高于50mm。一次搅拌的料浆应在于批刮时间内批刮完，初凝后的料浆不允许再加水搅拌使用。

本品只能用清水调和使用，不能同其他任何产品混合使用。

Grass-roots treatment The grassoots are solid ard free of floating ast and cirt.The smooth wall suface must be treated with Biber nvinoninental protection wal solid. After drying,the product cansescrapped, To eliminate loose parts, the moisture content on the wall surface should be less than 5%

Stir this product directly add water and stir, powder-water ratio，weight ratio 1: 0.65 to 0.7;consistency should bo adjusted slightly according to the thickness of one-time leveling.and the best construction is appropriate.

Batch apply of this producl: The thickhess of this product must not be Jeso than 2mm for each application,and the maxmum one time application cannot be higher than 50m. The slurry to te stired at one time should be applied within the batch application time. Tr3 slurry after the initial setting should hot be stirred with water.

This preduct can only be mixed with water and eannot be mixed with any other products.